Fly-Right Balancing Jig
Finding correct center of gravity has never been more easy!
Finding your R/C aircraft center of gravity has never been easier or more accurate than it is now with the Fly-Right Jig! This tool was designed to be used with a three-scale balancing system such as the Xicoy CG Meter or SkyRC CG Gauge (purchased separately). With the use of digital positioning readouts or “DRO’s”, the Fly-Right Jig takes all the trouble out of balancing your aircraft!
Now offering blue finish on Jigs and Work Stands!
Video review by JustPlaneCrazy
Utilizing Digital Position readouts (DRO), and the included 2 line, self-leveling laser, the Fly-Right CG Jig is extremely accurate and easy to use. No more measuring or having to use a plumb bob, clunky rods or tape!
Simply zero the included laser out at your axle and then move the laser out to your CG location. The dimension is instantly available for input into your Xicoy CG meter. It’s painless and fast!
The other DRO is attached to the laser axis and is for recording the position of the main gears distance to the CG. This is the second dimension input in the Xicoy balancer.
This axis is also used to input weight location or the third dimension asked for in the Xicoy balancer. Use the laser to find the dimension from the mains of where you would like to place weight and enter that into the Xicoy.
Be confident that your model is balanced properly and accurately! With the Fly-Right jig, you can be sure that this important last calculation is done correctly.
The Jig can accommodate models with up to an 94″ distance between the main gear and nose or tail gear and a main gear width of 38″ wide.
A self-leveling laser line is used to capture and transpose position from your air frame into the Xicoy CG meter.
The ease of use guarantees that you will balance your models more often. We are confident that you will love your Fly-Right Jig and will wonder how you ever found your correct center of gravity on your planes without it!
The Fly-Right Full Jig dimensions are 48″ wide on the mains gantry axis and 96″ long on the nose/tail wheel gantry axis! Big enough to fit a Ziroli C-47 on it out of the box!
A 360 degree self-leveling laser is now available as an upgrade which replaces the 2 line self-leveling standard laser. Have full 360 degree laser lines in both the horizontal and vertical axis. Make sure you get the best laser line coverage possible with this upgrade.
-
-
Radio controlled aircraftBLUE Fly-Right Jig FULL Version, Includes standard 2-line laser level, 2 DRO’s
$899.99 Add to cart -
-
-
-
Radio controlled aircraft360 Degree Laser UPGRADE, Replaces standard 2-line laser in Fly-Right Jig kit
$74.99 Add to cart -
-
Radio controlled aircraftBLACK Fly-Right Jig FULL Version, Includes standard 2-line laser level, 2 DRO’s
$849.99 Add to cart